All prices in Canadian Dollars
(unless otherwise specified)

If you have any questions about our equipment sales please use our contact form.

  Cut Off Saws
Item # Item Description Available
099 72" R Jumbo 2" eye, 100 teeth, 2 P/H on 7" circle, elongated, 2 gauge

 
100 84" M style Stellite    2" eye - 116 teeth, 6 circle P/H (bolt), 1½" on 8" circle 

 
101 84" M style Stellite 2" eye - 144 teeth, 6 circle P/H (bolt), 1½" on 8" circle

 
102 54" R.Jumbo 2" eye - 84 teeth, almost new

 
103 54" R.Jumbo 2¾" eye - 80 teeth

3
104 57" P Style 2" eye, 5 gauge, 2 - 7/8" P/H on 5" center, 160/170 teeth

 
105 51¼" M Style 2" eye, 5 gauge, 2 - 7/8" P/H on 5" center, 110 teeth

 
106 54" P style 2" eye

 
107 53½ P style 2" eye, 5 gauge, 150 teeth, 2 - 7/8" P/H on 5" center

 
108 55½ P style 2" eye, 4 gauge, 160 teeth,  2 - 7/8" P/H on 5" center

 
109 55" P style 2" eye, 5 gauge, 150 teeth,  2 - 7/8" P/H on 5" center

 
110 54" P style 2" eye, 2 - 7/8" P/H on 5" center, 150 teeth, 5 gauge

 
111 66" Z.Fir 2" eye - 126 teeth

 
112 60" Z.Fir 2" eye - 108 teeth

 
113 60" R Jumbo 2" eye, ¾ gauge, 96 Teeth, 2 - ¾" P/H on 7" circle

 
114 66" Carbide 2½" eye - 66 teeth

 
115 54" (55") R Jumbo 2" eye, 86 teeth, 2 P/H - 5/8" on 7" circle, 2 gauge

 
116 64" Inserted Saws 2" Eye, 100 Teeth, 30 to choose from      (not Carbide)

30
117 72" R Jumbo 2" eye, 3-4 gauge 112 teeth, 6 P/H on 7 & 8" circle

 
119 72" P style 2" eye

2
121 56" Carbide Cut Off Saw 96 teeth

 
122 66" Carbide Cut Off Saw 70 teeth

 
123 72" Clevi COS 2¼" eye, 80/84 teeth 2 P/H - 7/8" on 12" C 3 gauge

 
124 84" C.O.S 2" eye, appr. 120 teeth

 
125 66" R Jumbo 2½" eye - 15"(collered both sides), 100 teeth, 2 - 11/16 P/H on 6" circle, 3-4 gauge

7
126 36" P style 25/8" eye, 2 P/H, 11/16 on 8" circle, flat ground, looks new!

4
127 45" C.O.S 2" eye, 3-4 gauge, flat ground

 

  Headsaws
201 31" F Pattern 4¼" eye, 26 teeth, 7 gauge with 2 bolt patterns

 
202 33¾" B Pattern 3½" eye/1½ eye, 12 teeth, 8/9 gauge, 2 P/H on 4¾" C

 
203 36" F Pattern  (for resaw probably) 4" eye, 24 teeth, 7 gauge (no pinhole)

 
204 48" F6.Pattern 2" eye - 16 teeth  (29/16 pinhole on 5" center)

 
205 48" F Pattern 2" eye, 36 teeth  (1=8G/1=17G, PH same = 2 on 4" center, elongated)

2
206 50" F6.Pattern (good spare) 2" eye - 36 teeth,  - welded horn, brushed to 1¾, 25/8 PH on 4½

 
207 46” Headsaw 2” bore, (2) 7/8” holes to fit pins in arbour  

 
207PKG (2) 46” Headsaw w/ arbour & Bearings saws as above w/ Splitter Saw Arbour (2" shaft, (2) ¾ “ pins that fit holes in saw) & (2) NEW bearings (they were spares for the Splitter saw jack-shaft). 

2
208 48" F6.Pattern 2" eye, 40 teeth, 2 elongated P/H on 4" center, 7/8g, welded horn

 
209 48" F6.Pattern 2" eye, 36 teeth, 2 PH on 4" center, 7g, as new, 600 RPM

 
210 48" B8.Pattern 2" eye, 42 teeth, 2 PH on 3" center, 9 g, 600 RPM

 
212 48" F6 Pattern 2" eye, 2 PH on 4" - 4½" center, 32 Teeth, 7 gauge, Good Saw!

 
214 36" B7 Pattern 33/8" eye, 24 teeth, 7 gauge, 313/16 PH on 41/8 center

 
215 36" F8 Pattern 2" eye, 28 teeth, 2 PH -7/16" on a 4" center + 2 PH - 13/16" on a 4" center, 8 gauge

 
216 54" D7 Pattern 2" Eye, 2 PH on 3" center, 7 Gauge, 32 teeth, 600 RPM

 
217 44" Scragg Saws Seated, no carbide, 190 plate X 4½", 50 T, 29/16 PH @ 6¼" center

3
221 38" Circular Headsaw/resaw 24 - #3 teeth, 17/8" eye, 10 gauge, no PH

 
222 24" D9 pattern 13/8" eye, 16 teeth, 9 gauge

 
223 18" F9 pattern 4" eye, 14 teeth, 8 gauge, 2 PH on 4¾" center

2
224 16" B8 Pattern 4¼" eye, 12 teeth, 8 gauge, 2 P/H - 5/6 on 47/8" center

 

  Edger Saws
302 12" Diameter Carbide 4¾" eye, 12 teeth, 110 plate, 180 kerf, strobbed 34
303 New 13½ Diameter Carbide 7" eye, 24 teeth, .095 plate, 148 Kerf 34
304 New 14" Diameter Carbide 5" eye, 20 teeth, untipped, 110 Plate 13
305 New 14" Diameter Carbide 7" eye, 24 teeth, untipped, .095 plate 12
306 New 14" Diameter Carbide 7" eye, 18 teeth, untipped, 110 plate 9
307 16" Diameter Carbide 7" eye, 20 teeth, 120 plate, 210 kerf 59
308 16" Diameter Carbide 4¾" eye, 30 teeth, 120 plate, 180 kerf, strobbed 3
309 16" Diameter Carbide 4¾" eye, 30 teeth, 120 plate, 190 kerf, strobbed - boxed 14
310 16" Diameter Carbide 4¾" eye, 14 teeth, 130 plate, 195 kerf, strobbed - boxed 8
311 16" Diameter Carbide 7" eye, 20 teeth, 180 plate, 250 kerf 11
312 New 16" Diameter Carbide 7" eye, 20 teeth, 180 plate, 260 kerf 18
313 17" Diameter Carbide #3, 40 teeth, 95 p, 120 Kerf, splined, 5
314 17" Diameter Carbide #3, 34 teeth, 95 plate, 130 kerf, splined 12
315 New 17" Diameter Carbide 5¼" eye, 24 teeth, 120 plate, 200 kerf, strobbed 5
316 New 18" Diameter Carbide 71/8" eye, 20 teeth, 120 plate, 190 kerf, 1 p/h, 2 strobes straight to eye 43
317 New 18" Diameter Carbide 5¼"  eye, 24 teeth, 165 plate, 210 kerf 6
318 18" diameter carbide 71/8" eye, 20 teeth, 165 plate, 240 Kerf 15
319 19½ Diameter 5" eye, 30 teeth, 165 plate, 225 kerf  16
320 Can drive 20" Diameter 26 teeth, 126 p, 170 kerf X 3/8" euro tips 1
321 20" Diameter Carbide 7½" eye, 28 teeth, 160 plate, 260 kerf 10
322 20" Diameter Carbide 71/8" eye, 16 teeth, 148 plate, 220 kerf 30
324 20" Diameter Carbide 71/8" eye, 16 teeth, 140 plate, 210 kerf 30
325 20" Diameter Carbide 6½" eye, 50 teeth, 120 plate(11g), 180 kerf (8 have 8¼ butt on collars 1½" thick 8
326 21" Diameter Carbide 5½" eye, 24 teeth, 110 plate, 170 kerf, slots 30
328 26" Diameter Carbide 71/8" eye, 120 plate, 18 kerf 9

  Swage Tooth
398 New 22¼"  Swage Tooth 6" eye, 30 teeth, 165P (8 G) 16
399 New Swage tooth edger saws for Powell Edger 38" X 7¾ eye, 6 -  5/8" P/H, 7 gauge 28

  Inserted Tooth
400A 20½" Inserted tooth 5½ eye, 16 teeth, 134p (10g), F10, ¼"K 1
400B 20½" Inserted tooth 5½ eye, 16 teeth, 134p (10g), F10, ¼"K  
401 20" Inserted tooth 71/8 eye,  14 teeth, 165p (8g), F8, 265K 14
402 18" Inserted tooth 5¼ eye, 14 teeth, 180p (7g), F7, 11/32 2
403 New 17" Inserted Tooth 47/8" eye, 16 teeth, 2½ X 10 shank, ¼" 4
404 18" Inserted tooth 2¼" eye (slot), 16 teeth, F8, 5/16" 4
405 New 16" Inserted tooth 15/8" eye, 14 teeth, F8, 5/16" 4

  Trim Saws
500 20-22" Trimsaw 13/8" eye, 100 teeth, 180p (7g), flat plate - set teeth 1
501 36" Carbide Trimsaw(s)   7
502 38" carbide saws 136 teeth,  1-5/8" eye, 200 plate 17
503 32" carbide 160 p, 230 kerf, 1½" eye, appr. 120 teeth  
504 24" Carbide Trimsaw(s) 120 Teeth, 150p, 200 kerf, some have 1¼" & some have 1½" eye 9
505 28" Carbide Trimsaw(s) 150 teeth, 1½" eye, 8 gauge saw 10
506 26" Diameter Carbide Trimsaw(s) 1½" eye, 120 teeth, 160 Plate, 210 kerf 11
507 32" Diameter Carbide Trimsaw 1½ eye, 165 plate, 200 kerf, L/R carbide 2
508 22" Diameter Carbide Trimsaw 1¼" eye, 120 teeth, 110 plate, 160 kerf 10
509 24" Trimsaw Flat Ground, 120 teeth 30

Location
Overwest Saw & Used Equipment Sales Ltd. is located approximately 5 miles north of Campbell River, British Columbia.

Overwest Saw & Used Equipment Sales Ltd.
4863 Gordon Road, Campbell River, B.C. V9H 1T3
Email: info@overwestsaw.com
Telephone: (250)-286-1402, Fax: (250)-287-9688