All prices in Canadian Dollars
(unless otherwise specified)

SM99(a-b) are sold as a package deal only.

Will sell property & house separately or together as package

If you have any questions about our equipment sales please use our contact form.

• Top & Bottom Circular Headsaw Shafts

• Mobile Dimension Circular Sawmill

Cuts up to 24' (max 8" X 12" cut), 2 or 3 blade combination, all electric 3 PH/240 V powered by 55 KW Simpson Maxwell Duetz Generator (+/- 1400 hrs), C/W infeed deck (custom fabricated for sawmill) & Waste Conveyor (both run off generator).  Call for more info!

• 1974/75 Morbark Total Chip Harvester

Portable (on trailer), can be towed on highway, c/w 75" - 3 knife chipper, driven by 380 HP Cummins Diesel Motor, Power Packs, Savage Hyd Log Loader driven by Allis Chalmers Diesel Motor, will chip logs up to 22" Diameter.  Has been gone through and is in good shape.

• Lube System

Lube system with tank comes with 2 575 volt 3 hp commercial shear pumps

• Bradson 54" Chop Saw

c/w 3 - 54" saws

• Newnes 12' - 30 Bin J-Bar Sorter

Approx. 20 years old, comes with Hydraulics, some electrical, stacker, stick placer, unscrambler, & some spare parts.  Unit is in good to excellent condition

• Newnes 20' L/H Hydraulic 4' Stacker

comes with Hydraulic pack

2 Saw Bandsaw Scragg, for 10'-12' Material, Fastline with motors, etc.

• Keystone 4 Saw Scragg

Infeed turning rolls for 8' to 16' long logs, 4 - 54" dia collared saws mounted on double keyed arbor (currently fixed but are moveable), front and rear guides, sharp chain assembly c/w electric drive (no chain) and no setworks

   POR

• 72" L & M Chop Type Cut Off Saw

c/w 75 HP Motor, log clamp for cutting small logs, 2 saws

• Impressive shop built end- dogging circular scragg

• Mobile Dimension Sawmill

Model 128 2E, 20 HP - 460 Volt on Head Saw, 10 HP on Edger Saw, 30' track, 26' timber, c/w some spare parts.

• Lumber Package Rollcase

10 rolls, 26' long, 8" X 54" rolls

• Heavy Duty 4' Pallet Racking

Sections of 10'X12'X4', 16'X12'X4', 18'X10'X4', 22'X15'X4', call for more info!

   POR

• Hourglass Rolls

Factory Made, 24' long

• Mainland Scragg - 2 saw

48" Shifting saw, 3 spare saws, operators cab, 200 HP motor, infeed/outfeed landing table.  Can also come with power pack

• Marathon Sash Gang Mill (Small Type)

does 18" X 12" Cants, c/w saw sharpener clamp & tensioner.

 * Please Note that some of this equipment

has been sold *

• Complete Sawmill

from infeed deck to circular carriage, to edger to green chain, etc.  Call Glen for more info!

older model but runs, 25 HP - 440 volt motor, room for more saws

• Couttes Circular Sawmill

Top & Bottom saw, 48" saws

   POR

• Landing Table

11', 7 strand, RH

• 20' deck 2 strand, 72"

c to c, stop & loader, factory made, rails are double 10" channel welded into a tube,  no prime mover, jackshaft is present

• 26' deck , 2 strand  57"

 c to c, stop & loader, log turner, 27" I beam frame.  Electric drive.

• 14' deck, 2 strand  80"

 c to c, 2 strand with center rail,  gear box, no motor

• 30' deck, 2 strand,  48"

 c to c, stop & loader, hydraulic drive, 5" x 10" tube frame

   POR

• Chip N' Saw 12" DA Saw Box

The Chip N Saw made square timber out of round logs, saw section cut timber into boards (9'6"W, 10'L, 8'H), Double Arbour (2 saw shafts will do timber 14"W, 12"H,), has 2 driven infeed side press rolls, 2 top press rolls driven with air cyls, C/W some saw collars (Appr. 6" Dia), Does 12" Cants, no electric motors