All prices in Canadian Dollars
(unless otherwise specified)

Watch out for your copy of this months "HOT SALES" Flyer! 

These Motors & Accessories are only available for a Limited Time!

    Tp was here  Motors & Accessories

If you have any questions about our equipment sales please use our contact form.

Part # Picture Model Description Catalog #
NM03
  • NEW 30 HP Baldor Super E
1800 RPM, 230/460 Volt
 EM4104T
NM04
  •  5 HP Baldor Super E
1800 RPM, 230/460 Volt, 184TC Frame
 VEM3665T
NM05
  • NEW 3 HP Toshiba
1800 RPM, 230/460 Volt, 182T Frame
 B0034FLF2AYH
NM06
  • NEW 5(KW 3.7) WEG
1800 RPM, 575 Volt, 184TC Frame
 5HP4P184TC
NM07
  • 10 HP Baldor Super E
1800 RPM, 575 Volt, 215TC Frame, Vector Drive Motor.
 ZDM37745-5
NM08
  • NEW 30 HP Baldor Super E
1800 RPM, 230/460 Volt, 286T Frame
 EM4104T
NM10
  • NEW 30 HP Baldor Super E
1800 RPM, 230/460 Volt, 286T Frame
 M4104T
NM11
  • 150 HP Baldor Super E
1800 RPM, 460 Volt, 447T Frame
 ECP44156T-4
NM13
  • 200 HP Baldor Super E
1180 RPM, 460 Volt, 449T Frame, 8½" shaft length, 35/16" Shaft diameter.
 ECP44206T-4
NM15
  • NEW 10 HP Toshiba
1735 RPM, 230/460 Volt, F215T Frame
 B0104FLF2USW
NM17
  • NEW 5 HP Baldor Super E
1800 RPM, 230/460 Volt, 184TC Frame
 VEM3665T
NM18
  • NEW 30 HP Baldor Super E
1800 RPM, 230/460 Volt, 286T Frame
 EM4104T
NM19
  • 15 HP Toshiba
1800 RPM, 230/460 Volt, 254TC Frame
 B0154FLT2USW
NM20
  • NEW 75 HP Baldor Super E
1800 RPM, 230/460 Volt, 365TC Frame
 ZDM4316T
NM21
  • 7.5 HP Baldor Super E
1800 RPM, 230/460 Volt, 213T Frame
 EM3770T
NM22
  • 3 HP Baldor Super E
1800 RPM, 230/460 Volt, 184TC Frame
 VEM3665T
NM23
  • NEW 10 HP Baldor Super E
3450 RPM, 230/460 Volt, Saw Duty, c/w 1¾ plain shaft
 ASM7510
NM24
  • 30 HP Toshiba
1800 RPM, 230/460 Volt, 286T
 B0304FLF3UMH02
NM25
  • NEW ¼ HP Baldor Super E
3450 RPM, 115/230 Volt
 L3356
NM26
  • 7.5 HP Baldor Super E
1800 RPM, 230/460 Volt, 215T Frame
 M3770T
NM27
  • 10 HP Baldor Super E
1800 RPM, 230/460 Volt, 215T Frame
 M3774T
NM28
  • 20 HP Baldor Super E
1800 RPM, 230/460 Volt, 256T Frame, Vector Drive Motor
 ZDM2334T
NM30
  • 5 (KW 3.7) WEG
1800 RPM, 575 Volt, 184TC Frame
 CT005504P
NM31
  • NEW 15 (KW 11) WEG
1500 RPM, 415 Volt
 MA011404
NM32
  • NEW 10 HP Toshiba
1800 RPM, 230/460 Volt, 215T Frame
 4FA010L16B
NM33
  • NEW 5  HP Toshiba
1800 RPM, 230/460 Volt, 184TC Frame
 B0054FLC2AMH02
NM34
  • NEW 30  HP Toshiba
1800 RPM, 230/460 Volt, F286T Frame
 B0304FLF3UMH02
NM36
  • NEW  10 HP Toshiba
1800 RPM, 230/460 Volt, F215T Frame
 4FA010L1GB
NM39
  • NEW 60 HP Toshiba
1800 RPM, 230/460 Volt, 364TC Frame
 AF40602X4STDC
NM41
  • NEW 15 (KW 11) WEG
3600 RPM, 230/460 Volt, 215TC Frame
 CT015402PS
NM42
  • NEW 15 (KW 11) WEG
3600 RPM, 230/460 Volt, 215TC Frame
 HT015402PS4
NM44
  • 60 HP Toshiba
1800 RPM, 230/460 Volt, 364TC Frame
 B0604FLT3UMH
NM45
  • NEW 40 HP WEG
1800 RPM, 575 Volt
 CT040504P
NM46
  • 50 HP Baldor
1800 RPM, 230/460 Volt, 326TC Frame
 CEM4115T
NM47
  • Atlas Reducer
Ratio: 31.37:1, C-Face input for 15 HP(254TC) Motor, Triple Reduction, Foot Mount.
 AEAA0332
NM48
  • 6000 Series Inline Reducer

Ratio: 43:1, C-Face input for 15 HP & 20 HP Motor.  1.75" Input Shaft, 3.625 Output Shaft, C/W Coupling Guard, Foot Mount.

 CHHJ-6195Y-43
NM49
  • Mars Reducer

Ratio: 21.78:1, C-Face input for 7½ HP(213TC) or 10 HP(215TC) Motor, Double Reduction.

 YEAA0055
NM51
  • Mercury Reducer

Ratio: 11.02:1, C-Face input for 3 HP(182TC) or 5 HP(184TC) Motor, Double Reduction.

 XOAA0033
NM52
  • Atlas Reducer

Ratio: 13.66, Foot Mount, Double Reduction, 1.875" Input Shaft, 3.250 Output Shaft.

 AAA0043
NM53
  • Mercury Reducer

Ratio: 10.24:1, C-Face input for 15 HP(254TC) Motor, Triple Reduction, Foot Mount

 XEAA0033
We have many small(er) motor that are not listed - so if you are looking for a smaller motor please contact us as we may have what you are looking for!

Motors
M01
  • Toshiba 200 HP

575 Volt, 1800 RPM, Frame 447T2 (long frame) TFC.

POR
M02  
  • Toshiba 200  HP

460 Volt, 1800 RPM, frame 447T2 (long frame), chipper duty.

POR
M03  
  • GE 150 HP

575 Volt, 1800 RPM, 445 T frame TFC.

POR
M04  
  • Electric motors
 3 phase, 460 volt, all sizes.

POR
M07  
  • Toshiba 150 HP

575 Volt, 3500 RPM, 405 T5 frame ODP.

POR
M08
  • Tamper 125 HP Electric Motor

550 Volt, 115 Amps, 1766 RPM, model 405US-20B5,S/N 75680-01, 3 phase, 60 cycles, service factor 1.15, enclosure DP, Tamper AC motor Montreal Canada.

POR
M09  
  • Westinghouse 75 HP

460 Volt, 1200 RPM, 445 U frame ODP.

POR
M11  
  • various electric motors
 CGE 250 hp, 1180 rpm, 2300 volts,585S frame---300 hp, 1200 rpm, 460 volts, 507US frame------60 hp, 1800 rpm, 208/220/480 volt, 404U frame.

POR
M12  
  • 100 HP Electric motors
 550 volt, older model.

POR
M18

 
  • NEW Toshiba  [Synchronous)  2000 HP Motor

Pictures available

We also have available

  • Used Toshiba 2000 HP Motor - Call for more info!

Capacity 3 phase, type TAB, form KCPV, 24 poles, 300 RPM, 2300 Volts, 439 Ampers, 60 HZ, 0.8 power factor, continuous rating, WP1 enclosure, 250 excitation volts, 89 field ampers, 40 ambient temp, 581 M altitude, C code letter, F stator insulation class, F rotor insulation class, Nema MG 1-21 standard spec, 1.15 service factor. Manufactured in Brazil. New, never used. Voltage: 440/3/60.  Serial # E92025R900, Shaft dia. and length (12’’ x 22’’) single.  Overall height, length and width. (11 ft wide, 15' long, 10 ft high)  Weight.38580 lb / 17500kg, in excellent condition.  More pictures available.

Accessories
OM1

  • MCC Switches

(electrical box).

POR
OM2
  • transformer

600 to 460 volt, Cat#RC45SH/X, S/N B22750, 3 PH, insulation class - 220C, Pri voltage 600X, sec voltage 400X, KVA 45, HZ 60, Imp 1.5.

POR
OM3  
  • ABB Variable Frequency Drives
 3 ea used VFD's  250Kva SAMI-STAR ABB Variable Frequency Drives, approx. 14 years old, purchased from ABB, Working when we took them out.

POR
OM4

 

 
  • Electrical Panels

* -  Square D, 600V, 200 Amp, fuse disconnect.

Or

* -  3 phase distribution panel, 12-15 amp, breakers.

POR
OM5  
  • SIEMANS PLC 
 SIEMANS CPU 115V CPU 943B 6ES5 943-7UB11 ONE ONLY. 2 ONLY 6ES5-491-OLB11. 1 ONLY 6ES59151-7LD12. 3 ONLY 6ES5-441-7LA11 OUTPUT . 2 ONLY 6ES5-420-7LA11 INPUTS. 3 ONLY 6ES5-455-7LA11 OUTPUTS.

POR

Location
Overwest Saw & Used Equipment Sales Ltd. is located approximately 5 miles north of Campbell River, British Columbia.

Overwest Saw & Used Equipment Sales Ltd.
4863 Gordon Road, Campbell River, B.C. V9H 1T3
Email: info@overwestsaw.com
Telephone: (250)-286-1402, Fax: (250)-287-9688