All prices in Canadian Dollars
(unless otherwise specified)

If you have any questions about our equipment sales please use our contact form.

• New Jockey Grinder

Model E63, S/N 8342, W2883, C/W Drill & Wheel.

• Trip Hammer Setter

Model 359, for Circular Saws

• Duskop Dust Collector

3 to choose from:

• 1 model 420 - 1/3HP, 115V S/N 2669
• 2 models 520 - 220/440 volt, S/N 9524 & S/N 11098

• Accu Lube System Model LS-3V

for Bandsaw, 3 to choose from:

• (1)  S/N 020450

• (2)  S/N 020041

• (3)  S/N 020449

• Small Guide Holder

for grinding guide blocks (resaw & small bands)

• 4' Backgauge(s)

Armstrong and Hanchett, 6 to choose from.

• Barnhardt Bandmill short barrel grinder

with power head & regular head if needed.

• Barnhardt Bandmill short barrel grinder

Model 51, regular grinder, no power head.

• Older Model Filing Clamp

cleaned, painted and ready to go!

• Older Model Filing Clamp

cleaned, painted and ready to go!

• Foley Retoother, Handsaw Auto Filer & Handsaw Setter

• Retoother Model 385 - S/N 15084
• Handsaw Setter Model 392 - S/N 7327
• Handsaw Auto Filer Model 387 - S/N 27291

• 48" X 10" X 4" Bandsaw Anvils

4 to choose from

• Copy Cat Wheel Shapers

2 to choose from

• Armstrong #14 Shear

• Armstrong Shape-up

Located in Montana

• 26" Circular Tipping Table

for 18" & 22" Diameter saws, located in Montana

• Williams & White Circular Anvil Holders

29-1/2" high with a 10" circle top

• Circular Anvil Holder

29" high with a 16" circle top and a very heavy duty base

• Stryco Welder

Type BRG #D7339, 110V, 60 cycles, 13 amp, kva 15

• Heat Tension Crawlers

3 to choose from:

• (1) = $800
• (2) = $600

• Hanchett Wheel Arbour Alignment tool

• 16" Welding Clamp

on steel bench with casters and heating element

• 12" Welding Clamp

on stand

• Camco Tipping Table Fixture

Ready to go

• Saw holder(s)

• Camco Attachment

For a Grinder

• Williams & White Setter/tooth set

comes with foot pedal, for larger diameter/heavy gauge saws

• Wheel Arbour Alignment Gauge

Armstrong

• 16" Welding Clamp

on stand

• Chromalox Babbitt Pot

6½" circle X 9" deep

• Dust collector

• 16" Armstrong Welding Clamp

presently on Hanchett Bench, but will sell separately

• WAAGE Babbitt Pot

230 Volt, Single Phase, S/N MP250AXP-2C, 7200 Watts

• Foley/Bellsaw Sharp-all

model #210, S/N 19674, c/w chainsaw attachments, drill bit sharpener, wheels etc

• Acme Chainsaw Attachment

for Post Grinders

• Norpac Guide Holders

Used, 6 to choose from, single tightener, 10" long, C1039-B

• Armstrong /Acme Post Grinder Attachment

For Top Dressing, etc, 4 to choose from

• Pacific Saw & Knife Tipping Table

PSK-U2O, 3 to choose from

• Armstrong bandsaw filing clamps

#58 B32, 2 to choose from

• Alligator Airback feed

2 to choose from

• Williams & White Gauge Grinder

will grind 18" (Not quite as high as 19"),  110V

• Majove Granite Block

12" X 18" X 4", located in Montana

• #4 R/H Top & Front Grinder Parts

good shape

• (Used) Saw Holder for Bandsaws

Double Cut or large saws

• Acme Manual Circular Saw Setter

One As New!

2 to choose from, sets up to do 40" diameter saws with hammer and angle settings.

• (Used) Partial Front saw holder

for a 17-120 cut off saw grinder

• Delta/Rockwell Uniplane

with guide holder, 220 Volt, set of new carbide cutters

• Uniplace Carbide Cutters

• (60) BC609, R2, DET 1-K1
• (60) BC609, R2, DET 2-K1

• NEW Armstrong 360-C Fronts

• Thompson Lane Saw Guide Milling System

Model B, S/N 802, 115/230 Volt, 1/3 HP

• Armstrong Airback feeds

a - c

1. 12'-2" X 4" Aluminum Straight Edge
2. 14' Aluminum Straight Edge
3. 8' Aluminum Straight Edge

• Foley Filler Automatic Saw Filer

Model # 200, S/N # 20-4906, 115 Volt, 6.4 FLA

• (NEW) Oil Filled Gauges

• WIKA 4¼",  F, 0 to 1100 PSI
• 316SS tube & connection

• (NEW) Oil Filled Gauges

• BE 2¾", F, 0 to 400 BAR PSI
• 8 to choose from

• (NEW) Oil Filled Gauges

• WIKA, type 213.53.2, 5"
• Range 300 PSI/KPA
• Conn ¼ NPT BM
• P/N 8345333

• (NEW) Gauge

• Metek, 2¼", F, 0 to 400
• US gauge - G - 84
• Spec #48513, ¼ LM 400, P602

• (NEW) Gauge

• Marshall Town - spring system
• 0 to 100 PSI - 11438-73

• Armstrong #16 Grinder Parts

Older model #16 Grinder for parts

• Williams & White 16" Welding Clamp

Good Condition

Package Deal!

OP-70

1. Armstrong #2 L/H Band Grinder - Complete, Serial Number 7558
2. Armstrong #4 R/H Band Grinder  - Complete, Serial Number 15311
3. Armstrong #16 Circular Saw Grinder - Serial Number 5140
4. Armstrong #5 Stretcher Roll - (Band), Serial Number 1066
5. Armstrong Post Grinder -  Model #54, Serial Number 4588
6. Pacific Hoe Alligator Auto Leveler
7. Bandsaw Welding Clamp
8. (2 ea) Bandsaw Benches

Saw Shop for sale in Lower Mainland, British Columbia, Canada

• Foley Retoother, Handsaw Auto Filer & Handsaw Setter, Acme Post Grinder, Foley 310C w/skate sharpener Attachment, Foley Polisher, Scissor Sharpener, Drill Doctor, Oregon Chainsaw Sharpener, Bench Grinder, Belt Sander, Foley Circular Saw Setter, Tue Hone Knife Grinder, as well as  spare files, wheels and parts etc . . .  Call us for further details!

• Box of 13¾”x7”Guides

• 3 of 1.175 - single nozzle

• 1 of 2.010 – single nozzle

• 4 of 2.045 double nozzle

• 6 of 2.635 - double nozzle

• 4 of 2.025 - double nozzle

• Box of 13¾”x7”Guides Box G2

• 9 of 2.635 - double nozzle

• 10 of 2.045 - double nozzle

• 2 of 2.010 - single nozzle

• 1 of 1.175 - single nozzle

• 1 of 1.795 - double nozzle

• 2 of 3.185 - single nozzle

• Box of 13¾”x7”Guides Box G3

• 32 of 1.795 - double nozzle

• 8 of 2.045 - double nozzle

• 8 of  2.030 - double nozzle

• Box of 13¾”x7”Guides Box G4

• 23 of 1.775 - double nozzle

• 2 of 2.030 - double nozzle

• 1 of 3.605 - double nozzle

• 1 of 1.510 - single nozzle

• 1 of 1.435 - single nozzle

• Box of 13¾”x7”Guides Box G5

• 5 of 2.635 - double nozzle

• 1 of 2.010 - single nozzle

• 3 of 3.810 - double nozzle

• 2 of 3.185 - single nozzle

• 2 of 2.125 - single nozzle

• 2 of 2.045 - double nozzle

• 6 of 2.130 - double nozzle

• 3 of 3.390 - double nozzle

• 1 of 1.280 - single nozzle